User:DejongNestor676

From Nema Wiki

Revision as of 21:44, 18 August 2012 by DejongNestor676 (Talk | contribs)
(diff) ←Older revision | Current revision (diff) | Newer revision→ (diff)
Jump to: navigation, search

Is really a Telephone Engineer Required When Diagnosing a Line Fault


When the phone line goes dead lots of people panic and call their company straight away but this might grow to be an expensive mistake. Some faults can be brought on by equipment and extensions inside the home that are not taught in service provider.

Most houses in the united kingdom make use of a master socket known as an NTE5 with a detachable front plate that may be removed by taking out 2 short screws. By removing this front plate, assuming the home continues to be wired to standard, you will be disconnecting all internal telephone extensions. The rest of the part of the master socket or NTE5 now has an evaluation socket in the bottom right-hand corner for use to check the incoming line.

Are you currently Getting A Dialling Tone?

The next thing is to take a mobile phone you know is working, preferably one which does not require mains electricity, and plug it in to the test socket and listen for any dialling tone. When there is no dialling tone only at that test socket then the fault is extremely likely to be within the external network and all work to repair the fault can be executed by the company totally free.

When there is a dialling tone in the test socket and the tone disappears once the front plate is reinstated then there is a fault on the internal wiring or equipment. The next thing is to unplug from telephone sockets any equipment/modems/telephones in the home. If there is still no dialling tone then there has to be a fault around the internal wiring within the house.


bt engineer

Telephone Engineer Callout:

To correct this sort of fault, the best way forward is to buy a trained telephone engineer towards the property. This can be done using your service provider and can be expensive with any focus on the interior wiring starting around £200. Another option would be to contact a reputable engineer from our press or via the Internet, preferably an ex BT engineer who are able to provide the skills necessary for a lot less cost.

Many people are still under the premise that only BT Telephone Engineers are allowed to focus on internal/external telephone faults and can only give them a call out. Though this is correct concerning the external (any telephone wires outside of the property), it is not the case with the wires within the home.

It might be wise to remember that there are a lot of Ex BT Engineers that work for themselves and giving them a call out is actually over 50% cheaper than BT themselves and the jobs are carried out to the same standards.

Personal tools